Parabacteroides merdae strain粪副拟杆菌株 BioVector NTCC质粒载体菌种细胞基因保藏中心
- 价 格:¥49865
- 货 号:Parabacteroides merdae
- 产 地:北京
- BioVector NTCC典型培养物保藏中心
- 联系人:Dr.Xu, Biovector NTCC Inc.
电话:400-800-2947 工作QQ:1843439339 (微信同号)
邮件:Biovector@163.com
手机:18901268599
地址:北京
- 已注册
Parabacteroides merdae strain粪副拟杆菌株
Type strain. This strain has been sequenced as a reference genome for the NIH Human Microbiome Project.Product categoryBacteriaProduct typeAnaerobeStrain designationVPI T4-1 [CIP 104202T, JCM 9497]Type strainYesGenome sequenced strainYesIsolation sourceFecesGeographical isolationUnited States; TexasProduct formatFreeze-driedStorage conditions2°C to 8°CCharacteristicsCommentsThis strain has been sequenced as a reference genome for the NIH Human Microbiome Project.Medium 260: Trypticase soy agar/broth with defibrinated sheep bloodTemperature37°CAtmosphereAnaerobicHandling procedureOpen vial according to enclosed instructions. Under anaerobic conditions, withdraw 0.5 to 1.0 mL of #1490 broth from a single test tube (5 to 6 mL) with a Pasteur or 1.0 mL pipette. Rehydrate the entire pellet.Aseptically transfer this aliquot back into the broth tube. Mix well.Use several drops of the suspension to inoculate a #1490 agar slant and/or a pre-reduced #260 plate. An aerobic blood plate may be streaked to check for purity.Incubate the tubes and plate under anaerobic conditions at 37°C for 2 to 6 days. Incubate the purity plate aerobically at 37°C. ANAEROBIC CONDITIONS: Anaerobic conditions for transfer may be obtained by either of the following:Use of an anaerobic gas chamber.Placement of test tubes under a gassing cannula system hooked to anaerobic gas. Anaerobic conditions for incubation may be obtained by any of the following:Loose screw caps on test tubes in anaerobic chamber.Loose screw caps on test tubes in an activated anaerobic gas pack jar.Use of sterile butyl rubber stoppers on test tubes so that an anaerobic gas headspace is retained.Handling notesAlways use freshly prepared pre-reduced media or pre-reduced media that has been previously prepared but stored under anaerobic conditions. Resazurin in the media is a color indicator for anaerobic conditions. Observance of pink color in medium before use or during incubation shows anaerobic conditions have not been met and oxidation has occurred. Medium should be discarded.
Supplier来源:BioVector NTCC Inc.
TEL电话:400-800-2947
Website网址: http://www.biovector.net
Type strain. This strain has been sequenced as a reference genome for the NIH Human Microbiome Project.Product categoryBacteriaProduct typeAnaerobeStrain designationVPI T4-1 [CIP 104202T, JCM 9497]Type strainYesGenome sequenced strainYesIsolation sourceFecesGeographical isolationUnited States; TexasProduct formatFreeze-driedStorage conditions2°C to 8°CCharacteristicsCommentsThis strain has been sequenced as a reference genome for the NIH Human Microbiome Project.Medium 260: Trypticase soy agar/broth with defibrinated sheep bloodTemperature37°CAtmosphereAnaerobicHandling procedureOpen vial according to enclosed instructions. Under anaerobic conditions, withdraw 0.5 to 1.0 mL of #1490 broth from a single test tube (5 to 6 mL) with a Pasteur or 1.0 mL pipette. Rehydrate the entire pellet.Aseptically transfer this aliquot back into the broth tube. Mix well.Use several drops of the suspension to inoculate a #1490 agar slant and/or a pre-reduced #260 plate. An aerobic blood plate may be streaked to check for purity.Incubate the tubes and plate under anaerobic conditions at 37°C for 2 to 6 days. Incubate the purity plate aerobically at 37°C. ANAEROBIC CONDITIONS: Anaerobic conditions for transfer may be obtained by either of the following:Use of an anaerobic gas chamber.Placement of test tubes under a gassing cannula system hooked to anaerobic gas. Anaerobic conditions for incubation may be obtained by any of the following:Loose screw caps on test tubes in anaerobic chamber.Loose screw caps on test tubes in an activated anaerobic gas pack jar.Use of sterile butyl rubber stoppers on test tubes so that an anaerobic gas headspace is retained.Handling notesAlways use freshly prepared pre-reduced media or pre-reduced media that has been previously prepared but stored under anaerobic conditions. Resazurin in the media is a color indicator for anaerobic conditions. Observance of pink color in medium before use or during incubation shows anaerobic conditions have not been met and oxidation has occurred. Medium should be discarded.
Supplier来源:BioVector NTCC Inc.
TEL电话:400-800-2947
Website网址: http://www.biovector.net
- 公告/新闻